100W Cornlight Bulb
INPUT VOLTAGE – AC100-277V 50-60Hz
LEDS – 299PCS
DELIVERED LUMENS – 12500lm
BEAM ANGLE – 360°
KEVIN TEMPERATURE – 3000K-5700K
Ideal replacement: CFL, HID, MH & HPS Lamps in existing Fixtures,.
Compact Size : Easily installed into Standard Fixtures
Easy Installation & Retrofitting : Simply bypass Ballast and Screw-in
Beam Angle : 360° Illumination with high Lumen Efficacy of 125 lpw – perfect for High Bays,
Shoe Box, Area, Street and Roadway Lighting applications.
Flexible Mounting : Can be Mounted with Base Up, Down or Sideways.
Ultra-Long Design Life : Up to 60,000 hours*. Up to 14 years at an on-time of 12 hrs./day or up
to 17 years at an on-time of 10 hrs./day. (*Depending upon the ambient temperature of the
Solid-State : High-Shock and High-Vibration Resistant .
No Moving Parts : Quality built means this bulb requires no active
cooling fan. Bulbs with fans are at risk of burning out if the fan stops
working or if bugs get inside.
Instant Start & Restart : No warm up time required even in Extreme Cold.
Instant On and Flicker-Free: No restrike time or waiting for 10-20
minutes for the lights to turn back on like HID’s.
Enhances Vision: Zero Dark Spots for greater Visibility & Safety No Noise or RF Interference
No UV Emissions: Does Not attract Insects.
Radiation/Emissions-Free: No Harmful IR, No RFI/EMI/HD Fully Encapsulated with Heat and
Impact Resistant, UV Protected, Non-yellowing, Optical grade PC Lens.
Wide Operating Temperature Range: -22°F to +104°F [-30°C to +40°C] Patented Technology
Delivers Maximum, Lifetime Energy Savings Ideal for use with Renewable Energy: Solar & Wind
Power Eliminates the hassle of repeated relamping Shortest Payback Period and High ROI Longer
Life = Increased Sustainability + Dependability.
Warranty: 5-Years Warranty.
Turn off power before installation.
This model does not support dimmers of any type.
Do not use in areas with a humidity level above 85%
If installed outdoors, avoid exposure to rain/water.
Avoid touching the lamp while power is on.
Do not stare directly at the illuminated corn light.
This model is suited for open luminaires, and does
not require a separate shield.
The added weight of this light might cause instability
of free-standing luminaires.
Ensure your light fixture can support the weight
of this LED light.
Be sure power is turned off.
If replacing an existing CFL, Metal Halide, or HPS bulb,
remove existing bulb and rewire per diagram below.
Remove LED light from packaging and scew into socket.
For 28W-120W LED Corn Lights, use an aircraft cable
(not included) through the plastic ”eye” loop to secure
the lamp to a permanent structure.
SEPICN Corn Light fixtures need to simply be install
into an E26 (medium) or
E39 (mogul) base with 100-277V AC input. When
replacing an HID fixture with a
previously installed ballast, bypass the ballast and
wire directly into the fixture
based as picture below.